Видео

Happy to help. If the bikes sat for 10 years, that means oil would sump into that motor they are dry sump motors. So you have too much oil in the bike, but will deal with that when you can start it. now if it's backfiring black smoke. You still have to resolve your gas issue and that if it's leaking from the small hose on the bottom of the float bowl as stated you need a new float jet, I will send you a video on how to test your peacock. They are notorious for failing and causing all sorts of problems as you replace or repair the Petcock. You need to replace the screen in the tank so you will least start off with clean fuel, generally when the diaphragm gets a crack or a hole from the fuel that we are running ethanol. Most times you need to repair that Petcock. I will send you a video and out of test the Peacock. Thank you for watching and all your support. Ride safe and have a great day. ruclips.net/video/7Fo9Q93OJXI/видео.htmlsi=XhBKEmexf1FDOfJZ. Any questions just ask. Sports does Great bikes just be patient.

If you could send me a cell number I'll call you. I'm at my desk right now.

Happy to help. Any questions just ask. Thank you for watching and all your support. Ride safe and have a great day.

Happy to help. Take a close look at the configuration of those clips, they will clip in place. If not, they're wrong. It is for tention on the pads get the clip in place reinstall the Brake Pads. I will try to find a schematic on those clip assemblies. Thank you for watching and all your support Charles. Drive safe and have a great day.. www.google.com/search?q=Harley+Davidson+sportster+rear+brake+anti-rattle+clips.&client=safari&sca_esv=29a4f6823ccdc172&rls=en&sxsrf=ADLYWIJ3njZvfk1X5XZe4pP56SRpPW4Z4g%3A1719175295698&ei=f4h4ZpSgKvDSp84Pn5aJwAM&ved=0ahUKEwjU27mGy_KGAxVw6ckDHR9LAjgQ4dUDCA8&oq=Harley+Davidson+sportster+rear+brake+anti-rattle+clips.&gs_lp=Egxnd3Mtd2l6LXNlcnAiN0hhcmxleSBEYXZpZHNvbiBzcG9ydHN0ZXIgcmVhciBicmFrZSBhbnRpLXJhdHRsZSBjbGlwcy5IAFAAWABwAHgAkAEAmAEAoAEAqgEAuAEMyAEAmAIAoAIAmAMAkgcAoAcA&sclient=gws-wiz-serp. Hope this helps.

@@TwoWheelRocco No matter what I do the pad spring will not stay in place long enough to position the pads. That being said the image of the spring pad from sporty parts looks different from the replacement one that I have. I just place an order.

If you could, take a picture and send it to ERocco 3964@gmail.com. And let's see what you got. Happy to help. You can install the pads without those springs and you will have Brakes might rattle a little bit.

Happy to help. Sometimes these parts aren't what we think they are. It sounds to me taking it apart and if you have no feel in the clutch handle or resistance, the springs are wrong. That's what it sounds to me. Let us know how it works out. Take a closer look at those springs that's what controls the pressure on those friction plates in your clutch. Thank you for watching and all your support. Ride safe and have a great day and let us know how it works out.

Ok, I got everything in a complete set from Barnett but I will grab another set of springs and try again. I was also thinking maybe the springs weren't tightened down enough? I torqued them to 9ftlbs?

Take apart, reinstall, something wrong with the specs on the springs. Let us know how it works out.

Happy this helped. Any questions just ask. Thank you for watching and all your support Stuart. Ride safe and have a great day.

Happy to help. Any questions just ask, T mehank you for watching and all your support. Sparky. Ride safe and have a great day.

Happy to help any questions just ask. Thank you for watching and all your support Dan. Ride safe and have a great day.

​@@TwoWheelRocco a question I have indeed. Why might my throttle cable be stuck after re installing everything? I'm trying to problem solve right now.

Also, loosening the big screw holding the throttle linkage in frees it up, but the throttle sticks when I crank it

What I'm finding is that putting the accelerator pump linkage into the pump is causing the throttle to stick. Going through the whole carb again, disassembling and reinstalling everything

Happy to help. I will send a video most times. It's in the cable adjustment at the throttle. Loosen them up until your throttle moves freely and then make adjustments accordingly I will send a video. Thank you for watching and all your support Dan. Ride safe and have a great day. ruclips.net/video/YmocC2Q-7Q8/видео.htmlsi=TZJPr9n7FjYQuDQc any questions just ask.

Happy to help. Any questions just ask. Thank you for watching all your support Nick. ride safe and have a great day.

Happy to help everything is expensive now my friend I'm sorry to even think about that. You will have to look around and when you find the right price by it. Ride safe and have a great day and thank you for all your support.

I'm not really sure you'd have to give me the item number and I would gladly look it up.

Just trying to help. That was a customers bike. I agree with you 2050s a little thick but it was high miles bike. That's what he wanted. He supplied the oil and the filter. I just did it. I'm a Harley Davidson guy. Thank you for watching and your comment David. ride safe and have a great day. Love my Road King..

Happy to help. That's an idea, People kinda love the heal to toe shifter. It's a real signature thing on the cruisers. Thank you for watching and all your support Catman. Ride safe and have a great day.

Happy to help. If it's not slipping, do not change the clutch, if the handle feels good do not change the clutch. They are not hot rod bikes, the cruises take it easy and drive them. Thank you for watching and all your support Justin. Ride safe and have a great day. Let us know how it works out.

@@TwoWheelRoccoit takes off fine nothing there wrong whenever ur going and u get the rpms up it feels like the clutch is pressed in cause it revs up higher and slowly creeps speed but it’s only when ur half throttle or so

Let's know how it works out. Thank you for the update.

Happy to help. Thank you for the update. Love sportsters. Ride safe and have a great day Ed.

Happy to help. It's very common for the compensated not to loosen up. Let us know how it works out. Any questions just ask. Thank you for watching and all your support Terry. Ride safe and have a great day. Have to love these Road King..

You will have to look at the specs on those mufflers to know which one is louder sorry I can't be more help. I believe they're both the same.

You will have to look at the specs on those mufflers to know which one is louder sorry I can't be more help. I believe they're both the same.

I'm happy all went well. It's a great feeling to accomplish these repairs. Any questions just ask. Thank you for watching all your support Mr. Cox. Ride safe. Have a great day. Enjoy your ride.

Happy to help. Any questions just ask. Thank you for watching all your support Dopra, Ride safe and have a great day

Happy to help. Any questions just ask. Thank you for watching all your support Michael. Ride safe and have a great day. Let us know how it works out.

Happy to help. I would agree they're about the same, but if you look on the box, it will have a decimal chart and that will nail it right to that number of loudness. Thank you for watching and all your support GW. Ride safe and have a great day let us know how it works out.

Happy to help, just make sure you have a little play in your cable, If that doesn't correct it then it's at the hub. I would believe it's at the pin at the hub needs to be adjusted. Let us know how it works out any questions just ask, welcome to the sport and good luck with your new ride. I love Road King. Thank you for all your support Joe. Ride safe and have a great day.

Happy to help. You didn't have it on top dead center so just let it idle and the lifter will pump up. The lifter just collapsed when you put it back together. You need to have the free play when you are top dead center. Thank you for watching and all your support. Gustavo. Ride safe and have a great day.

That noise went away thank you .

Happy to hear all went well. I know you're proud your work. Good luck with your ride. I love the Sportster. Drive safe and have a great day.

Happy to help. Sounds like your speed meter is failing. Thank you for watching and all your support. You can replace it with one, that you could find on eBay. Thank you for watching and all your support Christopher. Ride safe and have a great day. I do not know of a fix for the inside of the Speedo lighting.

Happy to help. That would be your slide needle jet that's what controls mid throttle. Thank you for watching and all your support. BB. Any questions just ask I would clean it and make sure that slide is moving very freely. Ride safe and have a great day. You can play some washers under the slide needle and that will change your fuel curve. I'll send a video but it's will be with a Harley Davison, Sportster, Same principal. Take a look. ruclips.net/video/G1XD0hHtwCw/видео.htmlsi=lt--bCT2nVKc2JaW.

I will give that a try. After I turned the choke intake one and a half times, the bike would stall out when I put the choke fully in. Should I turn it a little bit more out or tighten it in a little bit more? Thanks for all your help.

If you need to choke to be engaged for your motorcycle to Idle, that's indicating you have a clogged idle jet and your choke is compensating for that and that's how it's idling off your choke. Your choke should be fully pushed in and the bike should Idle once she warms up. I would start by cleaning the Carburator idle jet and circuit. Very easy. And you will see the results. Let us know how it works out and what is this that you're working on turning the choke out or in I don't understand.

Happy to help. I believe that's the quality of the video. I just took a look. Those are hex bolts that's what's on Harleys.. 12 point sockets will take them off 10 mm. Thank you for watching and all your support King . Ride safe and have a great day. That's my personal bike. They're in perfect shape. Ride safe and have a great day. I used my cell phone for that video not that good.

Happy to help. Most slip on will not need a fuel pack or any engine management systems. Do not change your intake. This is the major problem. Thank you for all your support GW.. Ride safe and have a great day.

Happy to help. You don't need a fuel pack for just slip ons. Thank you for watching and all your support gwaraich. Ride safe and have a great day.

Happy to help. Any questions just ask. Thank you for watching and all your support Mark. Ride safe and have a great day.

Happy to help, no gasket just RTV. Any questions just ask. Thank you for watching and all your support MWA. Ride safe and have a great day.

@@TwoWheelRocco Thanks for the quick reply, Your the man!

Happy to help you're gonna have to do the research. I'll send you the eBay, but this was a long time agowww.ebay.com/sch/i.html?_from=R40&_trksid=p2334524.m570.l1313&_nkw=Sportster+Rush+slip+ons+Exhaust&_sacat=0&_odkw=Sportster+Rush+Exhaust&_osacat=0. That should be a good start.

@TwoWheelRocco don't have in this ebay

Rush is louder or wyatt getline

@@gwaraich2011 About the same, that's the best I could do. This video is a few years old. You'll have to do a little research. Sorry about that.

You will have to check the specs on the pipes for the loudness sorry about that.

Love to help. If you could send me a cell number and I'll give you a call. Rob.

That is very vague. Do you hear a fuel pump activate when you try to start? That would be an indication if you don't hear that pump you have a bad pump if you hear the pump. And you also hear.bubbling you got a bad line in your fuel pump. Happy to help. Any questions just ask thank you for watching and your support Rob. Ride safe and have a great day.

Happy to help, how long has this been doing this? How long have you owned this motorcycle? It is an air cooled motorcycle so it overheats when it's on the road where it is air cooled. Let us know and take a look at this link.www.google.com/search?client=safari&rls=en&q=2001+Ducati+monster+600+overheating+cools+down+and+then+able+to+start.&ie=UTF-8&oe=UTF-8 I believe your motorcycle is carbureted. So it would have to be a lean gas mix to cause these set of problems. Somewhere to start. Let us know if it's carbureted. Thank you for watching ride safe and have a great day. Hope that helps.

​@@TwoWheelRocco Thank you for your time to commenting.I bough this bike 2 weeks ago.When im in traffic it starts to lose the power and turns off like there is no fuel in tank.After some minutes when i trying to start the bike it wont start,sometimes it starts but when i rev the bike it turns off immediately.Sorry for my english and thani you so much.

Is it a carbureted or fuel injection? Sounds like the lack of fuel.

@@TwoWheelRocco Yes its carburated

That's where your problem lies. Take a close look at your Petcock and make sure you got clean fuel running to that carburetor. You will need a mechanic I think. Let us know. Take some pictures of the Petcock and the carburetor and you can send it to my email address E Rocco 3964@gmail.com

Happy to help. Any questions just ask. Thank you for watching all your support Mister Klien. Ride safe and have a great day. love those Road Kings.

Graduations on the motorcycle VTX are great bikes, welcome to the sport. Any questions just ask. Thank you for watching and all your support Jay. ride safe and have a great day.

Happy to help I believe rush is a better pipe. Thank you for watching and all your support Garry. Let us know what you think. Ride safe and have a great day.

@TwoWheelRocco wyatt gatling or Rush same louder let me thx

I would just put 1/8 inch FreePlay at the handle and see how that does, That should do the trick. Any questions just ask. Thank you for watching and all your support Joshua. Ride safe and have a great day

Happy to help you need to go back to the stock jet configuration that would be a 42 Idle and a 170 to 180 Main Start there, if he open up these jets, like I understand you're saying they are no good,, that's your problem. I have one question what type of exhaust pipe are you running and what air filter are you running? Thank you for watching and all your support. ohshift336, ride safe and have a great day.. Let us know how it works out. Swap those jets out for new ones. eBay not a problem. I'll send the link.. www.ebay.com/itm/166715283987?fits=Make%3AHarley-Davidson&itmmeta=01J0M9FVR8BZTEHW8BRH7SM5BE&hash=item26d1015a13:g:BscAAOSw7ZFmHPYK&itmprp=enc%3AAQAJAAAA8CAtD5gYYgw7lm5vD30uu7g3G1hcja9DkBBvQbCt8b5XxUUXYi1GG03HS0bvZWhXacZvX0eGUccdIwsLlySP3HVNLxPBMKyVcB89VqAY%2FPbKRHGj5kxXrq%2FSjsY5LbpnzCYlvRzvblva0pyAipqtRlRClRTQkWACAV1Bs7oLdIPGjJlEapISX31OBzhvPsqMHLoCSTYFsOWq0KBtFCUIynaFt6l3j92REcG994F%2FzpPXZ0vXO8fjAoVibCHFosfinTAvnCBlwvebumM6aDtDteHymhRPhwix01ckfa13lcoePJatNVI6p9HZt9PlTEu3ZQ%3D%3D%7Ctkp%3ABFBMpry_iYVk. Hope this helps..

Happy to help. That was a great movie, Breaking Bad, watched it twice. Thank you for all your support Jordan. Ride safe and have a great day.

Happy to help. Any questions just ask thank you for watching and all your support Shawn. Ride safe and have a great day.

Had no problem. That is an O2 Road King CVO and everything went nice and smooth and I've been riding that bike ever since I've owned it for many years never replace seals. Nothing just swapped out oil. Thank you for watching and all your support David. Ride safe and have a great day. I have put chrome fronts on many Road Kings and softails and never had any problem. Take a look..ruclips.net/video/GvJeIwkoVHs/видео.htmlsi=dYPmaJ31QmUvg1bh

Glad you like it. Thank you for watching and all your support. Gen X. Ride safe and have a great day.

@@TwoWheelRocco what grease do you prefer for the axels?

Happy to help,. Thank you for watching and all your support Wade.. Ride safe and have a great day.

Happy to help, Shifter levers threads start to get worn. I've seen it many times and there's no action. Take apart respect and alter and reinstall. Thank you for watching and all your support Cody. Ride safe and have a great day. Let us know how it works out.

Happy to help. Any questions just ask. I live in the Treasure coast of Florida. How can I help you. Thank you for watching and all your support Herbert. Ride safe and have a great day. Love those Sportster.